Indicates that the current rule applies to packets from the specified source IP address.
Prolog information
Metadata
Keywords:
Use no source-ip to indicate that the current rule applies to packets from any IP address.
Use not source-ip to indicate that the current rule applies to all packets except those coming from the specified IP address.
Syntax
[not] source-ip {host ip_address | any | ip_address wildcard}
no source-ip
Parameters
Parameter
Description
Possible Values
Default Value
host
Keyword that indicates a specific host IP address
ip_address
The IP address of the host
any
Keyword that indicates any IP address
ip_address wildcard
The range of IP addresses of the rule.
The zero bits in the wildcard correspond to bits in the IP address that remain fixed. The one bits in the wildcard correspond to bits in the IP address that can vary.
This is the opposite of how bits are used in a netmask.
User level
read-write
Context
ip pbr-list ip-rule, ip qos-list ip-rule, ip capture-list ip-rule, ip access-control-list ip-rule, ip crypto-list ip-rule
Note:
The not source-ip command is not relevant in the crypto-list ip-rule context.
Examples
To specify that rule 22 of QoS policy list 460 applies to any packet coming from IP address 135.64.104.102:
