Defines or removes redundancy pairs. A redundancy port acts as a backup port in case the primary port fails. The port can be any port that does not belong to a LAG or a LAG interface. Ensure that there is no redundancy scheme already defined on any of the ports.
Prolog information
Metadata
Keywords:
Syntax
set port redundancy prim_module/prim_port second_module/second_port {on|off} [redundancy_name]
Parameters
Parameter
Description
Possible Values
Default Value
prim_module
The module number of the primary port
prim_port
Primary port of the redundancy scheme
second_module
The module number of the backup port
second_port
Backup port of the redundancy scheme
on
Keyword specifying to define the redundancy pair
off
Keyword specifying to remove the redundancy pair
redundancy_name
Name for the redundancy scheme
User level
read-write
Context
general
Example
To specify that port 10/6 acts as a backup port for port 6/5, and to name the redundancy pair red1:
Gxxx-001(super)# set port redundancy 6/5 10/6 on red1 red1: Port 10/6 is redundant to port 6/5. Port redundancy is active - entry is effective immediately
Note:
If using spaces, enclose the entire string in quotation marks (for example, New York).
