Sets the maximum transmission rate for the DS1 facility in SLS.
Prolog information
Metadata
Keywords:
Note:
This command is valid only for DS1.
If this command is invoked to change the transmission rate and the DS1 facility and associated signaling group have already been provisioned, the command is blocked and a warning message, Administrative change is in violation with existing trunk member provisioning, is displayed.
Syntax
set bit-raterate
Parameters
Parameter
Description
Possible Values
Default Value
rate
The maximum transmission rate for the DS1 facility:
Sets the transmission rate at 1.544 Mbps (T1)
Sets the transmission rate at 2.048 Mbps (E1)
1544
2048
1544
User level
read-write
Context
sls > ds1
Example
To set the maximum transmission rate to 2.048 Mbps:
Gxxx-001 (sls-ds1-<port address>)# set bit-rate 2048
