Specifies the DSCP value that is set by the current policy operation.
Prolog information
Metadata
Keywords:
Use not dscp to specify that the current operation set any DSCP value other than requested value. The not dscp command is not relevant in the crypto-list ip-rule context.
Use no dscp to specify that the current operation set the DSCP value to
Note:
In crypto-lists, this command is only applicable for rules whose action is no protect.
Syntax
dscp {dscp_value| any}
not dscpdscp_value
no dscp
Parameters
Parameter
Description
Possible Values
Default Value
dscp_value
The DSCP value
0-63
any
Keyword indicating that any DSCP value will match the rule. Using this keyword is equivalent to specifying no dscp.
User Level
read-write
Context
ip capture-list ip-rule, ip pbr-list ip-rule, ip access-control-list ip-rule, ip qos-list ip-rule, ip crypto-list ip-rule
Note:
In ip-rule context, this command tests packets to see if they match the specified DSCP value, but does not change the DSCP value.
Examples
To specify that ip-rule 10 in crypto-list 901 match a DSCP value of 43:
Gxxx-001 (Crypto 901/ip rule 10)# dscp 43
To specify that ip-rule 10 in crypto-list 901 match any DSCP value:
