dial-pattern

Last Updated : Aug 20, 2015 |
Administers ARS dial patterns for SLS when used within the sls context to enter a second-level subcontext. After issuing this command, the prompt changes to sls-dial-pattern <dialed-string>. Type exit to leave the dial-pattern context, and return to the sls context.
Prolog information
Metadata
Keywords:

Syntax

dial-pattern dialed string

Parameters

Parameter
Description
Possible Values
Default Value
dialed string
The dialed string. It can contain a maximum of 28 characters.
You can configure a maximum of 30 patterns.
0-9, * and X or x as a pre-string or mid-string replacement. X' or x cannot be used at the end of a dialed string.

User level

read-write

Context

sls

Example

To enter the subcontext for dial-pattern 91:
Gxxx-001(super-sls)# dial-pattern 91
Gxxx-001(sls-dial-pattern 91)#

Sub-commands

The following commands are available once you are inside the sls > dial-pattern context:
Dial-pattern sub-commands
set delete-digits
set deny
set insert-digits (dial-pattern)
set max-length
set min-length
set tgnum
set type (dial-pattern)
show (dial-pattern)