show ip route

Last Updated : Aug 20, 2020 |
Displays information about the IP routing table. If no IP routes are specified, information about all IP routes are displayed.
Prolog information
Metadata
Keywords:

Syntax

show ip route [ip_address [ip_mask]]

Parameters

Parameter
Description
Possible Values
Default Value
ip_address
The IP address of the routes
ip_mask
The IP mask of the routes

User level

read-only

Context

general

Examples

To display all routes:
Gxxx-001(super)# show ip route
Showing 10 rows
Network    Mask Interface         Next-Hop      Cost  TTL  Source
-------    ----  -----------     --------      ----- ----- ---   ------
0.0.0.0    0     FastEth     10.0.0.1        1    n/a   DHCP
1.0.0.0    8     Vlan     1.0     1.0.0.1        1    n/a   LOCAL
2.2.0.0    16   Dialer    1      9.9.9.50        1    n/a   STAT-LO-P
3.3.0.0    16   Dialer    1      9.9.9.50        1    n/a   STAT-HI-P
7.0.0.0    8     FastEth     10.0.0.1 DHCP   1    n/a   STAT-LO
8.0.0.0    8     Vlan     1.2    8.0.0.1         1    n/a    LOCAL
9.0.0.0    8     FastEth     10.0.0.1 DHCP   1    n/a   STAT-LO
10.0.0.0   8     Vlan     1.0    1.0.0.2         20   n/a   OSPF-E2
10.0.0.0   24    FastEth     10.0.0.2        1    n/a   LOCAL
11.0.0.0   8     Vlan     1.0    1.0.0.2        20    n/a   OSPF-E2
Note:
If DHCP address negotiation is enabled on the FastEthernet interface, the Source column displays DHCP.
If the ip route was statically established via the FastEthernet interface on which DHCP address negotiation was configured, the Next-Hop column displays DHCP in addition to the address.
To display route 137.32.50.13:
Gxxx-001(super)# show ip route 137.32.50.13
To display a range from route 137.44.50.13 to 255.255.255.0:
Gxxx-001(super)# show ip route 137.44.50.13 255.255.255.0