show port lldp config

Last Updated : Nov 06, 2012 |
Displays port-level LLDP configuration.
Prolog information
Metadata
Keywords:

Syntax:

show port lldp config [module/port]

Parameters

Parameter
Description
Possible Values
Default Value
module
Number of module
1-10
port
Number of port(s)

User level

read-only

Context

general

Example

To display port-level LLDP configuration:
Gxxx-001(super)# show port lldp config
Port   Port     Port        System   System      System     Management
Number Status   Description Name     Description Capability Address     PVID
----   -------  ----------- -------  ----------- ---------- ----------- ------
 10/3  txAndRx  disable     disable  disable     disable    disable     disable
 10/6  txAndRx  disable     disable  disable     disable    disable     disable

Output fields

Field
Description
Port Number
The ports on which LLDP is configured
Port Status
The LLDP status of the port. Possible values:
  • disable – The LLDP agent neither transmits nor receives LLDP frames on this port
  • tx-only – The LLDP agent transmits LLDP frames on this port but does not store any information about the remote systems connected
  • rx-only – The LLDP agent receives, but does not transmit, LLDP frames on this port
  • rx-and-tx – The LLDP agent both transmits and receives LLDP frames on this port (default)
Port Description
Whether the Port Description TLV is transmitted (enable) or not transmitted (disable) from the port
System Name
Whether the System Name TLV is transmitted (enable) or not transmitted (disable) from the port
System Description
Whether the System Description TLV is transmitted (enable) or not transmitted (disable) from the port
System Capability
Whether the System Capability TLV is transmitted (enable) or not transmitted (disable) from the port
Management Address
Whether the Management Address TLV is transmitted (enable) or not transmitted (disable) from the port
PVID
Whether the Port-VLAN-ID (PVID) TLV is transmitted (enable) or not transmitted (disable) from the port