ip rip send-receive-mode

Last Updated : Nov 06, 2012 |
Sets the RIP send and receive modes on an interface. Use no ip rip send-receive-mode to set the RIP to talk (that is, send report).
Prolog information
Metadata
Keywords:

Syntax

ip rip send-receive-mode mode [default_route_metric]
no ip rip send-receive-mode

Parameters

Parameter
Description
Possible Values
Default Value
mode
The RIP send and receive mode
talk-listen — RIP receives and transmits updates on the interface
talkdefault-listen — RIP receives updates on the interface and sends only a default route
listen-only — RIP receives updates on the interface and does not transmit them
talk-listen
default_ route_metric
The route metric index
1-15

User level

read-write

Context

interface:FastEthernet (L2-L3, L3, PPP L2-L3, PPP L3), VLAN (L2-L3, L3), Loopback (L2-L3, L3), Tunnel (L2-L3, L3), Dialer (L2-L3, L3)

Example

To set the RIP protocol to receive and transmit updates on the FastEthernet interface:
Gxxx-001(if:fastEthernet 10/2)# ip rip send-receive-mode talk-listen