If the SLS survivable call engine is currently running, you can issue this command to stop SLS from operating.
If you enabled SLS and then entered additional administration, first disable SLS and then re-enable it. This causes the SLS application to resynchronize its administrative database with the gateway's global CLI command database.
Syntax
set sls {enable | disable}
Parameters
Parameter
Description
Possible Values
Default Value
enable
Keyword indicating to enable SLS
Important:
This command is not allowed when FIPS mode is enabled.
disable
Keyword indicating to disable SLS
User level
read-write
Context
general
Example
To enable SLS:
Gxxx-001(super-sls)# set sls enable Survivable Call Engine is enabled
