The port target must belong to a media module with a firmware release that supports the Test & Heal feature. The following parameters do not support the Test & Heal feature: an MM711 with a pre-30 hardware vintage, and an MM714 with a pre-10 hardware vintage.
Syntax
set port {slot port}
Parameters
Parameter
Description
Possible Values
Default Value
slot
Number of the slot, represented as a number preceded by the letter v. For example, slot 1 is represented as v1 .
A slot with an analog media module
port
Number of the port on the module, represented as two digits. For example, port 2 is represented as 02.
