Delete IP address binding.

Clear the statistics of the DHCP server.

Activate configured DHCP pools.

Enable the sending of a ping packet by the DHCP server to check if the IP address it is about to allocate is already in use by another client.

Set the time the DHCP server waits for a reply to a sent ping packet before allocating an IP address to a DHCP client.

Create a DHCP pool.

Provide startup parameters for the DHCP client device.

Reserve the pool’s IP address for assignment to a specific client.

Set up to eight default router IP addresses in order of preference.

Set up to eight Domain Name Server (DNS) IP addresses.

Set a domain name string for the client.

Set the end IP address of the range of available IP addresses that the DHCP server may assign to clients.

Configure the lease period for IP address assignment.

Configure the pool’s name.

Specify the IP address of the next server in the boot process of a DHCP client.

Enter the context of a DHCP option.

Configure a name for the DHCP option.

Enter the option data type and the option data.

Specify the optional server name in the boot process of a DHCP client.

Display DHCP pool configurations.

Set the start IP address of the range of available IP addresses that the DHCP server may assign to clients.

Configure the subnet mask of the pool.

Create a vendor-specific option with a unique index.

Set a vendor-specific identifier.

Name the vendor-specific option.

Set the data type and value of the vendor-specific option.

Activate DHCP server.

Display bindings.

Display DHCP server statistic.