Restore USB

Last Updated : Oct 16, 2020 |
Restores gateway files from a USB mass storage device.
Prolog information
Metadata
Keywords:
Note:
The restore operation does not fail if a specific file is missing or incompatible with the MM hardware.
Note:
In the FIPS mode, you can only restore from a backup that you perform on the same gateway. You cannot restore from a backup that you perform on a gateway that is in the non-FIPS mode.
Note:
In FIPS mode, identity certificates are not backed up to the USB device and must be downloaded again after the restore operation.

Syntax

restore usb usb-devicebackup-name [{announcements-internal-flash | announcements-compact-flash}]

Parameters

Parameter
Description
Possible Values
Default Value
usb-device
The USB mass storage device
usb-device0
backup-name
The backup directory path and file name
The gateway backup directory on usb-device0
announcements-internal-flash
A keyword indicating to restore the announcement files to the internal flash
announcements-compact-flash
A keyword indicating to restore the announcement files to the add-on compact flash

User level

read-write

Context

general

Examples

To restore gateway files from directory gatewaybackup1 on usb-device0:
Gxxx-001(super)# restore usb usb-device0 gatewaybackup1
To restore announcement files from directory 2 on usb-device0 to the compact flash:
Gxxx-001(super)# restore usb usbdevice0 2 announcements-compact-flash
Restore operation will remove existing files on the gateway. Do not remove USB
device until the end of operation. Do you want to continue (Y/N)? y
Beginning restore operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information, use 'show restore status' command.