copy https SW_imageA

Last Updated : Jul 12, 2021 |
This command downloads a software image from an HTTP or HTTPS server into Bank A of the Branch Gateway. If an URL with a username (for example, username@host) is used with the command, the HTTP command prompts for the password. In this case, the password can be blank.
Prolog information
Metadata
Keywords:

Syntax

copy https SW_imageA <URL> [transfer-type]

Parameters

Parameter
Description
Possible Values
Default Value
URL
The URL contains the following elements in order:
  • http://or https://
  • username (optional) followed by @
  • webserver host:- IPv4 address, IPv6 address, or Fully Qualified Domain Name of the remote HTTP or HTTPS server
  • :webserver port (optional)
  • /file path
  • path
  • filename
https://
transfer-type
The transfer type depending on the type of verification. The options are:
  • secure: verifies the certificate and hostname, applicable for https
  • certificate: verifies the webserver TLS certificate, applicable for https
  • unsecure: no TLS certificate verification required
  • secure
  • certificate
  • unsecure
  • secure for https
  • unsecure for http

User level

read-write

Context

general

Example

To download the software image file, g450_sw_41_44_0.bin (for G450 or G430 hardware vintage 1.x, 2.x, 3.x) from the HTTPS server with URL my.webserver.com:
copy http SW_imageA http://my.webserver.com/images/g450_sw_image_41_44_0.bin
copy https SW_imageA my.webserver.com/images/g450_sw_image_41_44_0.bin certcopy https SW_imageA https://10.123.1.3:8000/sw_image.bin
To download the software image file, g450_sw_41_44_0.bin (for G450 or G430 hardware vintage 1.x, 2.x, 3.x) from the HTTPS server with URL my.webserver.com with the username dan:
g450-025(super)# copy http SW_imageA https://dan@my.webserver.com/images/g450_sw_41_44_0.bin