dynamic-cac

Last Updated : Oct 25, 2015 |
Sets the dynamic CAC bearer bandwidth limit for the current interface. You can also specify an activation priority for the interface. In case more than one interface with a BBL value is up, the Branch Gateway reports the BBL of the interface with the highest activation priority.
Prolog information
Metadata
Keywords:

Syntax

[no] dynamic-cac bbl [activation_priority]

Parameters

Parameter
Description
Possible Values
Default Value
bbl
The bearer bandwidth for the current interface
0-100,000,000 Kbits/sec
-1
activation_ priority
The priority value of this interface
1-255
50

User level

read-write

Context

interface:FastEthernet (L2, L2-L3, PPP L2, PPP L2-L3), Tunnel (L2, L2-L3), Dialer (L2, L2-L3), Loopback (L2, L2-L3), VLAN (L2, L2-L3)

Example

To set dynamic CAC on FastEthernet interface , with a bearer bandwidth limit of 128 and an activation priority of 100:
Gxxx-001(super-if:FastEthernet )# dynamic-cac 128 100