Connecting to a Wi-Fi network

Last Updated : Aug 28, 2026 |

Prolog information

Metadata

Keywords:

Use this procedure to connect the phone to a Wi-Fi network. The phone reboots when you toggle between networks.

On the phone, go to Main MenuAdministration.
In the Access code field, enter the administration password and press Enter.
ADDITIONAL INFORMATION:
The default access code is 27238.
Press Enter.
Select Network interfaces.
In Network mode, use the arrow keys or the Toggle soft key to select Wi-Fi.
Configure the following parameters:
- Network config: Choose Auto or Manual to connect to a Wi-Fi network automatically or manually.
- SSID: This is a read-only field. Specifies the network name for the selected Wi-Fi network.
- Wi-Fi networks: Press the Select soft key to scan for the available Wi-Fi networks.
Use the navigation keys to select a Wi-Fi network and press Connect.
Press Save.

Send Feedback

AVAYA DOCUMENTATION CENTER