Specifies whether the Multicast Paging feature is enabled on the phone. If Multicast Paging state is not set, other settings related to the feature will be ignored.
The options are:
Enable
Disable (default)
Multicast Paging Codec
Specifies a codec which will be used in Multicast Paging transmissions.
The options are:
G.729 (default)
G.711u
G.711a
Multicast Paging TTL
Specifies the Time-To-Live (TTL) value for Multicast Paging packets. Valid values are 1 (default value) to 64.
Multicast Paging Groups To Listen
If the Multicast Paging feature is enabled, you can add, edit or delete incoming multicast page groups in this section.
The configuration fields are equivalent to the MP_GROUPS_TO_LISTEN value:
IP: the multicast IP address of the group
Port: the IP port of the Multicast Paging group. The valid value is an even integer from 1024 to 65535. The default value is 1024.
Priority: the group priority. The valid value is from 1 to 16. The default value is 8.
Label: the group label which the phone displays when the incoming page is played
Multicast Paging Groups To Send
If the Multicast Paging feature is enabled, you can add, edit or delete outgoing multicast page groups in this section.
The configuration fields are equivalent to the MP_GROUPS_TO_SEND value and control the same settings as Multicast Paging Groups To Send fields.
