Use this procedure to configure DCHPv4 from the phone Ethernet IPv4 menu. In this menu, you can also view the phone IPv4 address, gateway and mask IPv4 addresses.
Note:
If you disable Use DHCP option, manual input mode will be enabled.
Before you begin
Obtain the access code to Administration menu.
On the phone, press Main Menu.
Scroll to Administration, and press Select.
In the Access code field, enter the administration password and press Enter.
ADDITIONAL INFORMATION:
The default access code is 27238.
Press Enter.
Scroll to IP Configuration and press Select.
Scroll to Ethernet IPv4 and press Select.
Scroll to Use DHCP and press Toggle to enable or disable DCHPv4.
Press one of the following:
Save
OK
To exit the menu without saving the changes, press Cancel.
