Setting the Ethernet interface control

Last Updated : Aug 28, 2026 |
Prolog information
Metadata
Keywords:
Specify the network speed and duplex settings for the Ethernet interface.
  1. Press Main MenuAdministration.
  2. In the Access code field, enter the administration password and press Enter.
  3. Scroll to Network interfaces and press Select.
  4. In Network mode, use the Toggle soft key to choose Ethernet.
  5. In Network config, use the Toggle soft key to choose Auto or Manual.
  6. In Ethernet, use the Toggle soft key to set one of the following options:
    • Auto
    • 10Mbps half
    • 10Mbps full
    • 100Mbps half
    • 100Mbps full
  7. In PC Ethernet, use the Toggle soft key to set one of the following options:
    • Auto
    • 10Mbps half
    • 10Mbps full
    • 100Mbps half
    • 100Mbps full
    • Disabled
  8. Press Save.
  9. Optional: To return to the Administration menu, press Cancel.
Related links
Configuring the phone using the Administration menu
Accessing the Administration menu after login