Configuring IPv6 from the web interface

Last Updated : Aug 28, 2026 |
Prolog information
Metadata
Keywords:
Before you begin
Obtain the access code to Administration menu.
On the phone, use Administration menu for the following:
  • Enable the web server.
  • Get the IP address of the phone.
See Enabling the web UI through the phone and Viewing the phone IP address for more details.
  1. In your browser, enter the IP address of the phone and press Enter.
  2. On the Login page, enter the username and the password in the corresponding fields.
    ADDITIONAL INFORMATION:
    For more information about changing the default password, see Logging in to the phone web interface.
  3. Navigate to IP ConfigurationIPv6 Configuration (Ethernet).
  4. Configure IPv6 addresses in the following way:
    • To enable DHCPv6, select Yes from the drop-down menu next to the Use DHCPv6 option.
    • To use SLAAC addresses, select Yes from the drop-down menu next to the Use SLAAC option.
  5. Scroll to the end of the Ethernet page and press Save.