Most of the parameters are configured through multiple methods. If you configure a parameter through more than one method, the device applies the settings of the method that has a higher precedence. The following list shows the precedence of the methods in the highest to lowest order:
Administration menu on the phone. When the parameter USE_DHCP is set to 1, the phone gets the DHCP values from the DHCP rather than Administration menu of the phone.
Administration menu on the phone. When the parameter USE_DHCP is set to 1, the phone gets the DHCP values from the DHCP rather than Administration menu of the phone.
Administering the phone from the web UI.
Avaya Aura® System Manager and IP Office.
46xxsettings.txt file
DHCP.
LLDP. There is an exception of LLDP getting a higher precedence than the 46xxsettings.txt file and DHCP when the layer 2 parameters, such as L2QVLAN, L2Q, L2QAUD, L2QVID, L2QSIG, DSCPAUD, DSCPSIG, and PHY2VLAN are set through LLDP.
Note:
When parameters of the 46xxsettings.txt file are removed, or are not used, they reset to their default value.
