The primary function of RTCP is to provide feedback on the quality of service (QoS) in media distribution by periodically sending statistical information to participants in a streaming multimedia session.
Log in to the EMS web interface with administrator credentials.
From the Device menu, click the SBC name to administer.
In the navigation pane, click Network & Flows Advanced Options
On the Advanced Options page, click the RTCP Monitoring tab.
Select the RTCP Monitoring Relay check box.
ADDITIONAL INFORMATION:
For relay settings, do not use an IP address that is already in use for SIP signaling and media bandwidth efficiency.
In the Node Type field, perform the following:
For DMZ Avaya SBC configuration, click DMZ.
For CORE Avaya SBC configuration, click Core.
For remote Avaya SBC configuration, click Remote.
In the Relay IP field, click None.
ADDITIONAL INFORMATION:
For Core Avaya SBC configuration, in the Relay IP field, click the IP address of the core Avaya SBC Internal IP1.
Note:
Core Avaya SBC Internal IP1 address is the address used to send RTCP traffic received from DMZ Avaya SBC and core phones towards a monitoring server.
For Core Avaya SBC configuration, in the Port field, type 5005.
ADDITIONAL INFORMATION:
For other configurations, do not change the values.
Click Save.
Next steps
Configure application relay settings specific to the Core Avaya SBC configuration, remote worker configuration, or DMZ configuration.
