Configuring Binary Floor Control Protocol

Last Updated : Sep 01, 2026 |
Prolog information
Metadata
Keywords:
  1. Log in to the EMS web interface with administrator credentials.
  2. From the Device menu, click the SBC name to administer.
  3. On the dashboard, click Domain Policies Media Rules.
  4. On the Media Rules page, click the Advanced tab.
  5. Select the BFCP Enabled check box.
    ADDITIONAL INFORMATION:
    The media rule included in the endpoint policy group must be applied to the subscriber side and server side.
  6. In the navigation pane, click Network & Flows Media Interface.
  7. On the Media Interface page, click Add.
    ADDITIONAL INFORMATION:
    The EMS server displays the Add Media Interface dialog box.
  8. In the Name field, type the name of the media interface.
    ADDITIONAL INFORMATION:
    The IP Address field is pre-populated with the Media Interface IP address.
  9. In the Port Range field, enter the TCP port range.
    ADDITIONAL INFORMATION:
    The default range is 35000 to 40000.