Start the AOM tool by running the following command: /cms/aom/bin/aom_tool.The system displays the following messages:
Welcome to Avaya CMS Alarm Configuration Main Menu.
1) Set Alarm ID
2) Set Customer ID
3) Configure Alarm Destination
4) Send a Test Alarm
q) Quit
Enter choice (1-4, q):
Enter the number associated with the Customer ID option, and press Enter.The system displays the Customer ID prompt:
What is the Customer ID (10 digit customer code)? (default:0004558769)
Enter the Customer ID value, and press Enter.
Note:
The default Customer ID is normally the last value entered. CMS servers have a pre-defined default value that must be changed if the customer has an Avaya maintenance agreement.
The system displays the Customer Name prompt:
What is the Customer Name? (default:)
Enter the Customer Name, and press Enter. After you have configured the Customer name, the system displays the following messages, and the tool returns to the command line prompt:
