Start the AOM tool by running the following command: /cms/aom/bin/aom_tool. The system displays the following messages:
Welcome to Avaya CMS Alarm Configuration Main Menu.
1) Set Alarm ID
2) Set Customer ID
3) Configure Alarm Destination
4) Send a Test Alarm
q) Quit
Enter choice (1-4, q):
Enter the number associated with the Set Alarm ID option, and press Enter. The system displays the Alarm ID prompt:
What is the Alarm ID (10 digit alarm ID)? (default:3000004043)
Enter the Alarm ID that was obtained from either the Avaya GRT or Automatic Registration Tool (ART) tool, and press Enter.
Note:
The default Alarm ID is normally the last value entered. CMS servers have a pre-defined default value that must be changed if the customer has an Avaya maintenance agreement.
After you configure the Alarm ID, the system displays the following messages, and the tool returns to the command line prompt:
