Use test customer-alarm to test the customer provided alarm device by closing the alarm relay contact on the PN and EPN maintenance media module in a specified cabinet, including the TN2312BP, for 1 minute and then restoring the alarm relay contact to its current state. Verify the test by checking the customer alarm attached to the specified media module.
Syntax
test customer-alarm UU C [ short | long ][ repeat # | clear ][ schedule ]
location UU C
Extension of the data module or data channel to be tested, per dial-plan.
short
Execute a series of nondestructive diagnostic tests.
long
Execute a more comprehensive and longer version of the diagnostic tests. This may involve both destructive and nondestructive tests.
repeat #
Number of times to repeat the test.
clear
Repeat the test sequence until the alarm is cleared, or until a single test in the sequence fails.
schedule
Specify a start time for the command.
Example
test customer-alarm test customer-alarm 02 r 2test customer-alarm 01b r 25test customer-alarm 2a test customer-alarm 2a sh test customer-alarm 3 c
