Use test isdnpri-testcall to start an outgoing ISDN-PRI test call.
Only one ISDN trunk in each port network can be tested at one time. The maximum number of asynchronous outgoing test calls that can be run simultaneously depends on the number of maintenance/test media modules in the system.
Syntax
test isdnpri-testcall [ group number / member number ] [ minutes num-minutes ] [ schedule ]
group number
Administered trunk group number.
member number
Administered member within the trunk group.
minutes num-minutes
Specify the duration of the test call in minutes from 1 to 120. The duration defaults to 8.4 or 9.6 seconds.
schedule
Specify a time to run the command.
For more information, see 'Test #258 under the ISDN-TRK (DS1 ISDN Trunk)' section in the Maintenance Commands for Avaya Aura® Communication Manager, Branch Gateways and Servers.
Example
test isdnpri-testcall 78 / 2 minutes 10
Table 1: test isdnpri-testcall output field descriptions
Field
Description
Result
PASS — The test call was successfully initiated.
ABORT — Resources were not available (for example, a B-channel or maintenance/ test media module).
FAIL — An outgoing test call could not be initiated.
