Hardware Group Command State

The state of a hardware-group command:

• active — testing is in progress

• canceled — testing has been canceled

• complete — the command has completed and there is no testing going on.

Number of MOs Tested

The number of MOs in the specified group (see test ipserver-interface) that have had been tested by current hardware-group. This includes every MO that either was actually tested or was aborted due to resource contention.

Total Number of MOs to be Tested

The total number of MOs in the group that was specified in test hardware-group.

Percent Complete

A ratio of the number of MOs completed and the total number of MOs to test in the command.

Elapsed Test Time

The duration of the hardware-group test. If a test was canceled and then restarted this time excludes the cancel period. If hardware-group has finished it indicates the length of time it took to complete the command. The time is displayed as HH:MM:SS where HH is hours, MM is minutes, and SS is seconds.

Repetition Number

The number of iterations that have been completed corresponding to the ‘repeat’ or the ‘continuously’ option.

Percentage of Tests Passed

The percentage of tests that passed.

Percentage of Tests Failed

The percentage of tests that failed.

Percentage of Tests Aborted

The percentage of tests that were aborted.

Command

The hardware-group action/object and qualifiers that were entered.

Test Sequence

short/long.

Test Repetition

Displays either continuously or the keyword repeat along with the repeat value entered.

Output Options

Displays the selections that were chosen on the input screen: auto-page, background, or failures.

Hardware Options

Displays the selections that were chosen on the input screen (all-ports).