Use status pri-endpoint to display the internal software state information for diagnosis and to help locate facilities with which a PRI endpoint is communicating. Status information for each of the B-channels which make up the PRI endpoint is displayed in addition to some overall PRI endpoint information.
Syntax
status pri-endpoint extension #
extension #
PRI endpoint extension number.
Note:
A PRI endpoint can initiate and receive a call on any one or more of the B-channels making up the PRI endpoint.
Example
status pri-endpoint 25012status pri-endpoint 77868
status pri-endpoint field descriptions
Field
Description
Extension
PRI endpoint extension.
Width
Administered number of B-channels associated with the specified PRI endpoint.
Signaling Group ID
ID number of the signaling group that handles the signaling for the ports in the specified PRI endpoint.
Originating Auto Restoration
Administered option for the auto restore feature (restores calls originated from this PRI endpoint in the case of network failure):
y — restoration option enabled
n — restoration option disabled
B-Channels Active
The number of B-channels active on a call
B-Channels Idle
The number of B-channels in the in-service/idle state
Port
Port locations (cabinet-carrier-slot-circuit) for each of the B-channels making up the PRI endpoint.
Service State
Service state of the B-channels:
in-service/active
in-service/idle
out-of-service-NE
out-of-service-FE
maint-NE/active
maint-FE/active
maint-NE/idle
maint-FE/idle
NE (Near End) and FE (Far End) refer to which end of the B-channel has placed the facility in the current state.
NE refers to the switch and FE refers to the PRI terminal adapter (or any device that terminates the D-channel signaling on the facility).
Test In Progress
Whether or not there is any current maintenance testing on the port.
Connected Port
Connected port location (cabinet-carrier-slot-circuit) for each of the B-channels active on a call.
