Use status video-bridge to view the status of the video bridge.
Syntax
status video-bridge number
number
Video bridge number.
status video-bridge field descriptions
Field
Description
Name
The name configured on the video-bridge screen
Bridge Status
in-service — the bridge is available
low-resources — the bridge is heavily loaded, but available
call-rejected — the last conference attempt failed
no-resources — the bridge has not reported any resources
trunks-busy — the configured trunks for this bridge are all full or busied out. Check trunk status
out-of-service — check signaling group status
Note:
Typically, CM does not use the low-resources and call-rejected bridges. However, if the in-service bridge is unavailable, CM uses the low-resources or call-rejected bridge.
Ports Used
The number of call-legs administered on the video bridge form which CM uses.
Network Region
The network region used to assess the bandwidth requirements of the bridge.
PRIORITY CONFERENCE STATUS
The resources available for priority users (see Class Of Service settings)
Call Rate
The allowed bandwidth usage for the call-legs to a bridge.
Maximum — bandwidth up to the reported rate.
Exact — bandwidth of the reported rate.
Ports Available
The available ports reported by the bridge.
Note:
The available ports are bridge dependent and may not match with the CM configuration or the number of endpoints in the conferences, especially if the bridge is supporting multiple CMs.
Conferences Available
The available conferences are reported by the bridge.
Note:
The available conferences are bridge dependent and may not match with the CM configuration or the number of conferences underway, especially if the bridge is supporting multiple CMs.
Ports Rsvd per Conf
The number of ports on the bridge that a new conference takes up.
Conference Failure Rate
The number of conferences reverted to the audio-only mode.
Note:
Typically, conferences are reverted to the audio-only mode if one or more call-legs to the video bridge are dropped.
Participant Failure Rate
The number of participants who are unable to dial in to the bridge.
Note:
If a participant is unable to dial in to the bridge, the call-rejected status is displayed. This status continues to display till the participant is able to make a call successfully.
