Use monitor trunk to see same information as status trunk. monitor trunk updates the data automatically every minute, or manually with the UPDATE key. The terminal login is not dropped when you press CANCEL to cancel monitor trunk.
Syntax
monitor trunktrunk-group# [ hunt-group# ]
trunk-group#
Trunk-group number.
hunt-group #
Hunt group number.
monitor trunk field descriptions
Field
Description
Trunk Group/Member
Trunk group and group member number. (1–99/1–99).
Port
The port location (media gateway slot circuit) for trunks.
Signaling Group ID
If the trunk is ISDN, this field contains the number of the ISDN Signaling Group. Otherwise, this field is blank.
Connected Ports
Port locations (media gateway-slot-circuit) connected to the trunk.
Service State
In-service/active, in-service/idle, out-of-service, out-of-service-NE (Near End), out-of-service-FE (Far End), maint-NE/active, maint-FE/active, maint-NE/idle, maint-FE/idle, pending-in-service, pending-maint, or disconnected. NE (Near End) and FE (Far End) refer to the end of the trunk that has placed the facility in its current state.
Maintenance Busy
Identifies maintenance testing that occurs on the trunk.
CA-TSC State
The state of temporary signaling connections. (connection set up to pass call information over PRI signaling links).
