Use test signaling-group to validate the administration of a signaling group, and run a series of diagnostic tests on it.
Syntax
test signaling-groupgroup# [ short | long ] [ repeatrepeat# | clear ] [ schedule ]
group#
The station extension (must conform to dial-plan)
short
Run short test sequence. This is the default.
long
Run long test sequence.
repeat #
(Optional) The number of times to repeat the command. The default is 1.
clear
Repeats the test sequence until any active alarms against the maintenance object are cleared by the passing of tests, or until any test in the sequence fails.
schedule
(Optional) Specify a start time for the command.
Description
An ISDN-PRI signaling group is a set of B-channels whose signaling messages are carried together on a designated D-channel or set of D-channels. See status signaling-group for information on how to access the additional data after running test signaling-group.
Example
test signaling-group 1
test signaling-group 1 repeat 10
test signaling-group 2 short
test signaling-group 4 long
test signaling-group 4 long clear
