monitor system

Last Updated : Aug 07, 2023 |

Use monitor system to see a summary of the overall condition of the system, real-time status for time slots and buses, call rates, intervals, and so on. Press CANCEL to clear the command.

Syntax

monitor system view1 | view2 |conn [ conn pnn | conn pnn #
view1

Show attendant status, the maintenance status, the last hour’s measurement of trunk groups, hunt groups, and the attendant group, and the time of day.

view2

Show the view1 screen except the last hour’s hunt group measurements

conn

Show the connection monitor output for key information

Use monitor system view1 and monitor system view2 to see the condition, or health, of the system.

  • view1 shows attendant, maintenance, and traffic status. Attendant and maintenance status are updated every minute and traffic status is updated on an hourly basis. Pressing CANCEL forces a logout of the current login ID.

  • view2 shows the view1 screen except the hunt group measurements

Use monitor system connection to see the status of connections, compiled by the connection manager. This on-line status report is automatically updated every minute or by pressing the UPDATE key. Pressing CANCEL forces a logout of the current login ID.

Examples

monitor system view1
monitor system view2
monitor system conn

monitor system view1 and view2 field descriptions

Field

Description

# of alarms for other resources

The number of existing minor and major alarms on every maintainable object in the system except trunks and stations.

First OSS number has been informed

Has every alarm been reported and acknowledged by the first OSS telephone number? If “Alarm Origination” is not enabled or there are no active alarms, this is n.

Measurement Hour

The starting time of the period for which the measurement was taken. For example, if the measurement hour is shown as 18, the traffic status data is for the time from 6 PM to 7 PM. The measurement is taken on an hourly basis).

Grp no

The trunk-group or hunt-group number.

Grp dir

Group direction: incoming, outgoing, or two way.

Calls qued

Total calls that arrived and were placed in the queue for trunk groups.

Calls aban

Total calls that were abandoned by the caller.

%Out blkg

The ratio of outgoing calls that are not carried, due to overload conditions, on a trunk group to the outgoing calls offered.

% Time ATB

The percentage of time within the polling interval that every trunk in the trunk group was unavailable for use.

Time of day

The current time of day acquired from the system.

monitor system conn field descriptions

Field

Description

Max_callrate

The maximum call rate hit during the time since the last hour has passed. For example, if monitor system conn is executed at 20 minutes past 12:00, this shows the maximum call rate obtained during the past 20 minutes.

Next_hour

0 or 1, depending upon if the measurements being taken are for this hour or the next. You can relate to the previous field in that the maximum call rate is reflected for this hour. When this flag is set, statistics begin to accumulate for the next hour. Thereafter, the maximum call rate becomes zero and new accumulations begin.

tot_ts_req

Number of time slots in use during the time elapsed since the top of the last hour. Data is collected every 100 seconds. When the timer fires and the data collection occurs, a check is made as to how many time slots are in use. One number is displayed for each PNN requested.

ts_total

Number of time slots requested since the top of the last hour.

fts_total

Number of fiber time slots requested since the top of the last hour.