Use of ANI without Vector Routing Tables

Last Updated : Aug 06, 2013 |
Prolog information
Metadata
Keywords:
1. wait-time 4 secs hearing silence
2. goto step 13 if ani = none
3. goto step 12 if ani = 3035367326
4. goto vector 74920 if ani <= 9999999
5. goto vector 43902 if ani = 212+
6. goto vector 43902 if ani = 202+
7. wait-time 0 seconds hearing ringback
8. queue-to split 16 pri m
9. wait-time 120 seconds hearing 32567 then continue
10. announcement 32456
11. goto step 9 if unconditionally
12. route-to number 34527 with cov y if unconditionally
13. route-to number 0 with cov n if unconditionally
14. busy
In step 2, calls that do not have an associated ANI are routed to an operator. In step 3, calls are routed from a phone to a specified extension. In step 4, operator or attendant local calls are routed, which are calls with less than seven digits, to a different vector. In steps 5 and 6, calls are routed from area codes, that is, Numbering Plan Areas (NPAs) 212 and 202 to a different vector. Calls that are not rerouted by the previous vector steps are put in a queue.