On the System Parameters Customer-Options (Optional Features) screen, ensure that the following fields are set to
Maximum Administered Remote Office Trunks
Maximum Administered Remote Office Stations
Product ID registration limit
Remote Office
IP station
ISDN-PRI
Also, install and administer your Remote Office hardware at the remote location and obtain the following information from the remote administration:
IP address
Password
As an example, set up a remote-office location using Avaya R300 Remote Office Communicator hardware, add a new node, and set up the signaling group and trunk group.
Type change node-names IP.
Press Enter.
STEP RESULT:
The system displays the Node Name screen.
In the Name field, type in a word to identify the node.
Type Remote 6.
In the IP address field, type in the IP address to match the one on the Avaya R300 administration.
Press Enter to save your changes.
Type add remote office, and the number for this remote office.
Press Enter.
STEP RESULT:
The system displays the Remote Office screen.
Fill in the following fields.
ADDITIONAL INFORMATION:
Node Name - match the name on the IP Node Names screen.
Network Region - this must match the network region on the IP Interfaces screen for the circuit packs that connect this remote office. Use display ip-interfaces to find this information.
Location - match the one set up on the Location screen for this remote office.
Site Data - identify the street address or identifier you want to use.
