Use the following procedure to configure the PE interface on the server using the server SMI.
Select the interface used for PE on the Network Configuration page.
ADDITIONAL INFORMATION:
Avaya Solutions Platform S8300 provides only one interface to configure PE.
The Network Configuration page can be found on the server’s SMI. Select Server (Maintenance) Server Configuration.
If this is a survivable core server or a survivable remote server, enter the additional information in the Configure LSP or ESS screen.
ADDITIONAL INFORMATION:
Registration address at the main server field: Enter the IP address of the PE interface on the main server to which the survivable remote server or survivable core server connects. The IP address is used by the survivable remote server or survivable core server to register with the main server. In a new installation where the survivable remote server or the survivable core server has not received the initial translation download from the main server, this address is the only address that the survivable remote server or the survivable core server can use to register with the main server.
File synchronization address of the main cluster: Enter the IP address of a server’s Network Interface Card (NIC) connected to a LAN to which the survivable remote server or the survivable core server is also connected. The survivable core server or the survivable remote server must be able to ping to the address. Select which interface you want the file sync to use. Use the customer LAN for file sync.
