Changing the QSIG signaling group

Last Updated : Oct 07, 2026 |
Prolog information
Metadata
Keywords:
  1. Enter change signaling-group n, where n is the signaling group number, for example, n = 18.
    ADDITIONAL INFORMATION:
  2. Set the Q-SIP field to y.
    ADDITIONAL INFORMATION:
    By default, the Q-SIP feature is disabled. The system displays this field only when the Group Type field is set to
  3. .
  • In the SIP Signaling Group field, type a valid entry.
    ADDITIONAL INFORMATION:
    The valid entry must refer to an administered SIP signaling group. For example, if you have created SIP signaling group
  • .
  • Select Enter to save your changes.