Changing the SIP trunk group

Last Updated : Oct 07, 2026 |

Prolog information

Metadata

Keywords:

Enter change trunk-group n, where n is the trunk group number, for example, n = 17.
Ensure that the Group Type field is set to SIP.
Click Next until you see the Protocol Variations section.
Set the Enable Q-SIP field to y.
ADDITIONAL INFORMATION:
By default, the Q-SIP feature is disabled.
In the QSIG Reference Trunk Group field, type a valid entry.
ADDITIONAL INFORMATION:
The valid entry must refer to an administered QSIG trunk group. For example, if you have created QSIG trunk group
Select Enter to save your changes.

Send Feedback

AVAYA DOCUMENTATION CENTER