Setting up remote access example

Last Updated : Oct 07, 2026 |
Prolog information
In our example, we set up a remote access extension with maximum security. This assists you in blocking unauthorized people from gaining access to your network.
  1. Enter change remote-access and select Enter.
  2. On the Remote Access screen enter 1234 in the Remote Access Extension field.
    ADDITIONAL INFORMATION:
    This is the extension specified in the Incoming Destination field on the CO Trunk screen.
  3. Enter 7 in the Barrier Code Length field.
    ADDITIONAL INFORMATION:
    This is the number of digits your barrier code must be when entered.
  4. Enter y in the Authorization Code Required field.
    ADDITIONAL INFORMATION:
    This means you must also enter an authorization code when you access the system’s Remote Access facilities. For information about setting up access codes, see Authorization Codes setup.
  5. Enter y in the Remote Access Dial Tone field.
    ADDITIONAL INFORMATION:
    This means you hear dial tone as a prompt to enter your authorization code.
  6. Enter 1234567 in the Barrier Code field.
    ADDITIONAL INFORMATION:
    This is the 7-digit barrier code you must enter to access the system’s Remote Access facilities.
  7. Type 1 in the COR field.
    ADDITIONAL INFORMATION:
    This is the class of restriction (COR) number associated with the barrier code that defines the call restriction features.
  8. Enter 1 in the TN field.
    ADDITIONAL INFORMATION:
    This is the Tenant Partition (TN) number.
  9. Enter 1 in the COS field.
    ADDITIONAL INFORMATION:
    This is the class of service (COS) number associated with the barrier code that defines access permissions for Call Processing features.
  10. Type the expiration date in the Expiration Date field.
    ADDITIONAL INFORMATION:
    This is the date the barrier code expires. A warning message is displayed on the system copyright screen seven days before the expiration date. The system administrator can modify the expiration date to extend the time interval, if necessary.
  11. Enter y in the Disable Following A Security Violation field.
    ADDITIONAL INFORMATION:
    This disables the remote access feature following detection of a remote access security violation.
  12. Select Enter to save your work.