Specifies the date and time when the alarm is generated.

Specifies the severity of the alarm.

Specifies the current status of the alarms.

Specifies the name of the host server that generated the alarm.

In case of the trap listener service, this column specifies the system name.

Specifies the IP address of the system that generated the alarm.

Provides a detailed description of the problem that generated the alarm.

Specifies the unique identifier for an alarm.

Specifies the log event ID if the alarm is generated from logs or the Event OID if the alarm is generated from the trap listener service.

Specifies the SNMP OID of the alarm.

Specifies the unique identification number assigned to the product, also called the product ID. This number helps in identifying the component that generated the alarm.

For alarms that are generated from trap listener, the system displays the System OID.

Displays the details of the selected alarms.

Changes the status of the selected alarm. The options are:

• Acknowledged

• Cleared

Changes over to the Auto-Refresh mode. When the Alarming page is set in this mode, it automatically updates the alarms in the table. A toggle button.

Exports the selected alarms to a CSV file, which can be viewed with Wordpad or Excel.

Exports all the alarms to a CSV file, which can be viewed with Wordpad or Excel.

Displays fields that you can use to specify the search criteria for searching an alarm.

Refreshes the log information in the table.

Displays fields under select columns that you can use to set filter criteria. A toggle button.

Hides the column filter fields without resetting the filter criteria. A toggle button.

Clears the filter criteria.

Filters alarms based on the filter criteria.

Selects all the alarms in the table.

Clears the check box selections.

Displays the logs in the previous page. This button is not available if you are on the first page.

Displays the logs in the next page. This button is not available if you are on the last page.

Use this section to specify search conditions. Select the search criteria from the first drop-down list. Select the operator from the second drop-down list. Enter the search value in the text field.

Select following search criteria from the first drop-down list:

• Time Stamp: Searches all of the alarms that match the specified date and time. The valid format for entering the date is MM/DD/YYYY. The valid format for entering the time is HH:MM.

• Severity: Searches all the alarms that match the specified severity level.

• Status: Searches all the alarms that match the specified status.

• Host Name: Searches all of the alarms that are generated from the specified host.

• Identifier: Searches all the alarms that match the specified identifier.

• Description: Searches all the alarms that match the specified description.

• M/E Ref Number: Searches all the alarms that match the specified M/E Ref Number.

When you select Begin Date and End Date from the first drop-down list, you are prompted to enter the date in the third field.

Clears the entered search criteria and sets the default search criteria.

Searches the alarms based on the search conditions.

Hides the search fields.

Adds a search condition.

Deletes a search condition.