OID information for currently supported alarms

Last Updated : Oct 30, 2026 |
Prolog information
Note:
All RHEL MIB modules can be found under the /usr/share/snmp/mibs/ directory. For the ASP R7.x solution, Avaya has not implemented any proprietary MIBs.
Alarm Description
SNMP OID Information
Alarm Name
Generic Interface Down Event: A physical network interface in the server has gone down. This requires investigation. If network redundancy has not been configured, services will get impacted. Also, when a virtual machine gets shutdown a link down event gets triggered with the VM virtual interface info e.g. vnet0.
1.3.6.1.6.3.1.1.5.3
linkDown
Generic Interface Up Event: A physical network interface in the server has gone UP. Also, when a virtual machine gets powered on a link UP event gets triggered with the VM virtual interface info e.g. vnet0. This event can be used to clear alarm generated by "Link Down" event.
1.3.6.1.6.3.1.1.5.4
linkUp
A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered. Trap gets generated when the SNMP agent on the host gets restarted.
1.3.6.1.6.3.1.1.5.1
coldStart
An error message describing the load-average and its surpassed watch-point value. The snmpd.conf file has been set to: %90 CPU utilization to represent Load Average in 1 minute.
Variable Binding
OID: 1.3.6.1.2.1.88.2.0.1 [mteTriggerFired]
OID: 1.3.6.1.4.1.2021.10.1.100.1 [laErrorFlag.1]
Object Name:
1.3.6.1.2.1.88.2.1.1.0 [mteHotTrigger.0]
1.3.6.1.2.1.88.2.1.5.0 [mteHotValue.0]
1.3.6.1.4.1.2021.10.1.2.1 [laNames.1]
laErrMessage.1
The 1-minute CPU load average is below the established, watch-point value. High CPU Usage flag has cleared.
Variable Binding
OID: 1.3.6.1.2.1.88.2.0.1 [mteTriggerFired]
OID: .1.3.6.1.4.1.2021.10.1.100.1 [laErrorFlag.1]
Object Name:
1.3.6.1.2.1.88.2.1.1.0 [mteHotTrigger.0]
1.3.6.1.2.1.88.2.1.5.0 [mteHotValue.0]
1.3.6.1.4.1.2021.10.1.2.1 [laNames.1]
laErrMessage.1
An error message describing the load-average and its surpassed watch-point value. The snmpd.conf file has been set to: %85 CPU utilization to represent Load Average in 5 minutes.
Variable Binding
OID: 1.3.6.1.2.1.88.2.0.1 [mteTriggerFired]
OID: 1.3.6.1.4.1.2021.10.1.100.2 [laErrorFlag.2]
Object Name:
1.3.6.1.2.1.88.2.1.1.0 [mteHotTrigger.0]
1.3.6.1.2.1.88.2.1.5.0 [mteHotValue.0]
1.3.6.1.4.1.2021.10.1.2.2 [laNames.2]
laErrMessage.2
The 5-minute CPU load average is below the established, watch-point value. High CPU Usage flag has cleared.
Variable Binding
OID: 1.3.6.1.2.1.88.2.0.1 [mteTriggerFired]
OID: .1.3.6.1.4.1.2021.10.1.100.2 [laErrorFlag.2]
Object Name:
1.3.6.1.2.1.88.2.1.1.0 [mteHotTrigger.0]
1.3.6.1.2.1.88.2.1.5.0 [mteHotValue.0]
1.3.6.1.4.1.2021.10.1.2.2 [laNames.2]
laErrMessage.2
An error message describing the load-average and its surpassed watch-point value. The snmpd.conf file has been set to: %80 CPU utilization to represent Load Average in 15 minutes.
Variable Binding
OID: 1.3.6.1.2.1.88.2.0.1 [mteTriggerFired]
OID: 1.3.6.1.4.1.2021.10.1.100.3 [laErrorFlag.3]
Object Name:
1.3.6.1.2.1.88.2.1.1.0 [mteHotTrigger.0]
1.3.6.1.2.1.88.2.1.5.0 [mteHotValue.0]
1.3.6.1.4.1.2021.10.1.2.3 [laNames.3]
laErrMessage.3
The 15-minute CPU load average is below the established, watch-point value. High CPU Usage flag has cleared.
Variable Binding
OID: 1.3.6.1.2.1.88.2.0.1 [mteTriggerFired]
OID: .1.3.6.1.4.1.2021.10.1.100.3 [laErrorFlag.3]
Object Name:
1.3.6.1.2.1.88.2.1.1.0 [mteHotTrigger.0]
1.3.6.1.2.1.88.2.1.5.0 [mteHotValue.0]
1.3.6.1.4.1.2021.10.1.2.3 [laNames.3]
laErrMessage.3
A text description providing a warning, and the space left on the disk. The snmpd.conf file has been set to: disk /var/lib/libvirt 10%
Variable Binding
OID: 1.3.6.1.2.1.88.2.0.1
Object Name: 1.3.6.1.4.1.2021.9.1.101.1
dskErrorMsg
High Disk Usage flag has cleared. Total system disk usage is below the established, watch-point value.
Variable Binding
OID: 1.3.6.1.2.1.88.2.0.1
Object Name: 1.3.6.1.4.1.2021.9.1.101.1
dskErrorMsg
Available memory in Host below threshold. For ASP 130 snmpd.conf file has been set to: memSysAvail <=4000000 (4GB)
Variable Binding
OID: 1.3.6.1.2.1.88.2.0.1 [mteTriggerFired]
OID: 1.3.6.1.2.1.25.2.3.1.5.11 [hrStorageSize.11]
Object Name:
1.3.6.1.2.1.88.2.1.1.0 [mteHotTrigger.0]
1.3.6.1.2.1.88.2.1.5.0 [mteHotValue.0]
mteHotTrigger
High Memory Usage flag has cleared. Available memory is above the established, watch-point value.
Variable Binding
OID: 1.3.6.1.2.1.88.2.0.1 [mteTriggerFired]
OID: 1.3.6.1.2.1.25.2.3.1.5.11 [hrStorageSize.11]
Object Name:
1.3.6.1.2.1.88.2.1.1.0 [mteHotTrigger.0]
1.3.6.1.2.1.88.2.1.5.0 [mteHotValue.0]
mteHotTrigger
An indication that the SNMP agent is in the process of being shut down.
OID: 1.3.6.1.4.1.8072.4.0.2
nsNotifyShutdown