This test verifies the wiring and operation of the signaling link between the switch and a endpoint or adjunct on a BRI interface. This test is not executed from the administration terminal, but rather is executed by using a BRI test set equipped with a display. The test set may replace the BRI set, ASAI or Avaya adjunct under test by plugging it into the same jack or by bridging it onto the wiring at some point between the switch and the endpoint or adjunct, thereby creating a pseudo-BRI multipoint configuration.

When plugged into the port in this mer, the test set establishes a signaling link connection with the switch and attempts to complete Service Profile IDentifier (SPID) initialization by using the Service SPID administered for the system, for more information see the System Maintenance Administration screen. If the test set displays the correct administered port address for the endpoint or adjunct under test, the test passes, see the table. If after one minute nothing is displayed on the test set, the test fails.

The abbreviations used in Service SPID Display have the following meanings: