Before the firmware can be downloaded to the target stations, the image file must first be read into Communication Manager memory.
On the System Access Terminal (SAT) using the craft login and password, enter change tftp-server
ADDITIONAL INFORMATION:
The TFTP Server Configuration form displays the following:
change tftp-server Page 1 of 1 TFTP Server Configuration Local Node Name: clan1 TFTP Server Node Name: tftpserv1 TFTP Server Port: 69 File to Retrieve: 2420v01.bin File Status: File Size: Filename in Memory: Station Type:
Enter the node name of the PROCR that connects over the LAN to the FTP file server in the Local Node Name field.
Enter the host name of the FTP file server in the TFTP Server Node Name field.
Enter the port number in the TFTP Server Port field.
Enter the name of the File to Retrieve from the FTP file server and submit the command.
Enter display tftp-server.
ADDITIONAL INFORMATION: display tftp-server TFTP Server Configuration Local Node Name: clan1 TFTP Server Node Name: gingerale TFTP Server Port: 69 File to Retrieve: 2420v015.bin File Status: File download successful File Size: 236 Filename in Memory: 2420v015.bin Station Type: 2420
Verify the file download was successful by checking the File Status field.
