IP DSP Resource H.248 GW Summary Report field descriptions

Last Updated : Aug 03, 2014 |

Name

Description

GW Num

The H.248 gateway number.

GW Type

The H.248 gateway type.

Peak Hour

The measurement hour with the highest usage.

Net Reg

The network region number.

G711 Equivalent DSP Rsrc Capcty

The maximum number of unencrypted and simultaneous G.711 DSP resources that the gateway supports.

If the media processor capacity is changed during the measurement hour, the field displays an asterisk (*).

For gateways with older firmware that do not support G.711 DSP resources, the field displays n/a.

G711 Equivalent DSP Rsrc Peak

The maximum number of G.711 equivalent DSP resources in use during the measurement hour.

For gateways with older firmware that do not support G.711 DSP resources, the field displays n/a.

G711 Equivalent DSP Usage (ERL)

The time that the G.711 codecs are in use during the measurement period. The time is measured from the time the voice channel is allocated until it is released, including the time that the voice channel is on a call. This value is calculated as follows:

For gateways with older firmware that do not support G.711 DSP resources, the field displays n/a.

IGC Usage

The usage of the gateway in the Inter-Gateway connection.

Total DSP Pegs

The number of times that an IP media processor port is allocated to the gateway during the measurement hour.

IGC Pegs

The number of times that an IP media processor port is allocated to the gateway to connect two endpoints through an IGC.

GW Denied Pegs

The number of times that an IP media processor port is required for a call in the gateway, but is unavailable.

% Den

The percentage of pegs that are denied during the measurement period.

% Den is calculated as:

% Out of Srv

The percentage of time that the ports are out of service during the measurement period. This value includes the ports that are manually busied out or are used for maintenance during the measurement period.