Available contexts

Last Updated : Aug 25, 2023 |

The following table describes all the contexts in the CLI. The Context column provides the command to type in order to enter the context. The CLI prompt column is the prompt that you see once you have entered the context.

Table 1: List of CLI Contexts

Context

Description

CLI prompt

Banner login

For editing a text message that appears before users login.

(login)#

Banner post login

For editing a text message that appears after users login.

(post-login)#

certificate-options

TLS Certificate validation options.

(certificate-options)

CNA testplug

Configuring a CNA testplug.

(cna-testplug 1)#

composite-operation

Security ACL match action.

(ACL 301/CompOp 2)#

composite-operation

QoS policy list match action.

(QoS 401/CompOp 2)#

crypto isakmp policy

Create an ISAKMP policy (VPN).

(config-isakmp:1)#

crypto ipsec transform-set

Create an IPSec transform set (VPN).

(transform:ts1)#

crypto isakmp peer

Create an ISAKMP peer (VPN).

(peer:149.49.70.1)#

crypto isakmp peer-group

Create an ISAKMP peer group (VPN).

(peer-grp:vpn.avaya.com)#

crypto map

Create a crypto map (VPN).

(crypto:1)#

dscp-table

QoS policy list DSCP to CoS map.

(QoS 401/dscp 63)#

Interface USB

Configuring the USB interface.

(if:USB-Modem)#

Interface Loopback

The loopback virtual interface.

(if:loopback 1.0)#

Interface VLAN

Branch Gateway interfaces to VLANs.

(if:vlan 1)#

Interface FastEthernet

An Ethernet port connected directly to the router.

(if:fastEthernet 20/1)#

Interface Tunnel

A GRE Tunnel interface. A GRE tunnel is a virtual point-to-point link between two routers at two ends of an Internet cloud.

(if:Tunnel 1)#

Interface DIaler

A Dialer interface.

(if:Dialer 1)#

ip Access-Control-List

Security Access list.

(ACL 301)#

ip capture-list

Configure a capture list.

(Cap 501)#

ip capture-list/ip-rule

Configure a capture list rule.

(Cap 501/ip rule 22)#

ip dhcp pool

Configure a DHCP pool.

(DHCP 5)#

ip dhcp pool/option

Configure a DHCP option.

(DHCP 5/option 19)#

ip dhcp pool/vendor-specific-option

Configure a vendor specific DHCP option.

(DHCP 5/vendor specific 1)#

ip next-hop-list

Configure a next hop list.

(next hop list 1)#

ip pbr-list

Configure a PBR list.

(PBR 801)#

ip pbr-list/ip-rule

Configure a PBR list rule.

(PBR 801/ip rule 22)#

ip-rule

Security ACL list entry.

(ACL 301/ip rule 4)#

ip QoS-list

QoS policy list.

(QoS 401)#

(Log in as Privileged User)

Root Read Write context.

#

(Log in as Supervisor)

Root Admin context.

(super)#

(Log in as User)

Root Read Only context.

>

Router OSPF

OSPF routing protocol configuration.

(router:ospf)#

Router RIP

RIP routing protocol configuration.

(router:rip)#

rule

QoS policy list entry.

(QoS 401/rule 4)#

rtr

Enter RTR configuration mode.

(rtr icmp 1)#

sls

Configure Standard Local Survivability (SLS).

(sls)

sls/station

Configure SLS stations.

(sls-station <extension>)

sls/trunk-group

Configure SLS trunks.

(sls-trunk-group-<tgnum>)

sls/ds1

Configure SLS DS1 parameters.

(sls-ds1-<port-address>)

sls/sig-group

Configure SLS signaling-group parameters.

(sls-sig-group <sgnum>)

sls/bri

Configure SLS BRI parameters.

(sls-bri <slot-address>)

sls/dial-pattern

Configure SLS dial-pattern parameters.

(sls-dial-pattern <dialed-string>)

sls/incoming-routing

Configure SLS incoming-routing parameters

(sls-incoming-routing <tgnum>)

ssh-client-configuration

SSH Client configuration options.

(ssh-client-configuration)

ssh-server-configuration

SSH Server configuration options.

(ssh-server-configuration)

track

Configure an object tracker.

(track rtr 1)#