Tests the connection to the expansion module(s). Expansion 1 is the EM200 connected to the CONNECTOR OUT 1 connector on the rear of the Branch Gateway, and expansion 2 is the EM200 connected to the CONNECTOR OUT 2 connector on the rear of the Branch Gateway.
Syntax
test expansion [expansion-id]
Parameters
Parameter
Description
Possible Values
Default Value
expansion-id
The ID of the expansion module whose connection is being tested. If no ID is specified, then the connection to both expansion modules is tested.
1,2
User level
admin
Context
general
Example
To test the connection to expansion module 1:
Gxxx-001(super)# test expansion 1
EXPANSION BOX TEST RESULTS
--------------------------
EXPANSION 1 PASS
EXPANSION 2 FAIL (BAD CABLE or EXPANSION BOX IS POWER DOWN)
