Displays port status on I/O modules. If no port is specified, information for all ports is displayed.
Syntax
show port [module[/port]]
Parameters
Parameter
Description
Possible Values
Default Value
module
Number of the module
port
Number of the port on the module. You can also specify a range of ports separated by a dash. For example:
10/3-4 for both ETH LAN ports on the front panel
User level
read-only
Context
general
Example
To display port information for all ports:
Gxxx-001(super)# show port
Port Name Status Vlan Level Neg Dup. Spd. Type
------ ------- --------- ---- ----- ------ ---- ---- ----------------
6/5 NO NAME connected 3 0 enable full 100M G430 Media Gateway 10/100
BaseT Port
10/6 NO NAME connected 3 0 enable full 1G G430 Media Gateway 10/100
BaseT Port
Output fields
Name
Description
Port
Module and port number
Name
Name of port
Status
Status of the port — connected, faulty, disabled, no link
Vlan
VLAN ID of the port
Level
Priority level of the port — 0-7
Neg
Auto-negotiation status of the port — enabled, disabled
