copy ftp startup-config |
Download a Branch Gateway configuration file from an FTP server to the Startup Configuration NVRAM. |
copy running-config ftp |
Upload the current Branch Gateway configuration to a file on an FTP server. |
copy running-config scp |
Upload the current Branch Gateway configuration to a file on a SCP server. |
copy running-config startup-config |
Commit the current configuration, including Standard Local Survivability (SLS) data, to NVRAM. |
copy running-config tftp |
Upload the current Branch Gateway configuration to a file on a TFTP server. |
copy running-config https |
Upload the current Branch Gateway configuration to a file on a HTTP or HTTPS server. |
copyedge running-config scp |
Upload the current Branch Gateway configuration to a file on a SCP server through Avaya SBC tunnel. . |
copy tftp startup-config |
Download a Branch Gateway configuration file from a TFTP server to the Startup Configuration NVRAM. |
copy usb startup-config |
Download a Branch Gateway configuration file from a USB mass storage device to the Startup Configuration NVRAM. |
copy scp startup-config |
Download a Branch Gateway configuration from a SCP server to the Startup Configuration NVRAM. |
copy https startup-config |
Download a Branch Gateway configuration from a HTTP or HTTPS server to the Startup Configuration NVRAM. |
copyedge scp startup-config |
Download a Branch Gateway configuration from a SCP server via Avaya SBC tunnel to the Startup Configuration NVRAM. |
copy startup-config ftp |
Upload the current Branch Gateway configuration to a file on an FTP server. |
copy startup-config scp |
Upload the current Branch Gateway configuration to a file on a SCP server. |
copy startup-config tftp |
Upload the current Branch Gateway configuration to a file on a TFTP server. |
copy startup-config usb |
Upload the current Branch Gateway configuration to a file on a USB mass storage device. |
copy startup-config https |
Upload the current Branch Gateway configuration to a file on a HTTP or HTTPS server. |
copyedge startup-config scp |
Upload the current Branch Gateway configuration to a file on a SCP server through Avaya SBC tunnel. |
erase startup-config |
Reset the NVRAM parameters to the factory default values. This command is an alias for nvram initialize. |
nvram initialize |
reset the NVRAM parameters to the factory default values. This command is an alias for erase startup-config. |
show copy status |
Display the status of the copy running-config startup-config operation. |
show download status |
Display the status of the current Branch Gateway configuration file download process, as the file is being loaded into the device. |
show erase status |
Display the status of the erase startup-config operation. |
show running-config |
Display the Branch Gateway’s current configuration. |
show startup-config |
Display the NVRAM based configuration loaded automatically at startup. |
