Defines the incoming signaling supervision mode for analog DID trunks or DS1 tie trunks only in SLS.
Syntax
set supervisionsup-type
Parameters
Parameter
Description
Possible Values
Default Value
sup-type
For analog-did group types:
The incoming signaling supervision mode for analog DID trunks
immediate
wink
wink
For t1inband and e1inband group types:
Signaling supervision for the non-ISDN digital trunks
loop-start
ground-start
wink-wink
wink-immediate
wink-auto
immediate-immediate
auto-auto
auto-wink
wink-wink
User level
read-write
Context
sls > trunk-group
Examples
To define the incoming signaling supervision mode as wink mode:
Gxxx-001 (sls-trunk-group-<tgnum>)# set supervision wink
To define the incoming signaling supervision mode as wink-wink mode:
Gxxx-001 (sls-trunk-group-<tgnum>)# set supervision wink-wink
1
For TIE trunks you must specify both the incoming and outgoing modes. For example, wink-immediate requires the DS1 interface to use wink supervision to answer an incoming call and use an immediate seizure protocol for outbound calls.
