The no oob-interface command removes a configured out of band interface. The command is denied if access on the other interfaces was disabled.
Note:
A reboot is required after the out-of-band management interface is removed.
Syntax
no oob-interface
User Level
read-write
Context
Interface: VLAN (L2, L2-L3) or FastEthernet
Example
To define the VLAN 10 as the Out of Band Management Interface:
Gxxx-001(super)# interface vlan 10
Gxxx-001(super-if:Vlan 10)# no oob-interface
Copy the running configuration to the start-up configuration file,
and reset the device to finish the Out of Band Management Interface configuration.
Done!
