interface tunnel |
|
Enter interface tunnel configuration mode, create an interface tunnel if it does not exist, or delete an interface tunnel or sub-interface. |
|
keepalive (GRE tunnel) |
Enable the tunnel keepalive feature. |
|
tunnel checksum |
Add a checksum to the GRE header of packets traveling through the tunnel. |
|
tunnel destination |
Set the destination address of the tunnel. |
|
tunnel dscp |
Assign a DSCP value to packets traveling through the tunnel. |
|
tunnel key |
Enable and set an ID key for the tunnel. |
|
tunnel mode |
Specify the encapsulation method of the tunnel. This command is only included for future development, and for conformity with other systems. Currently, the tunnel can only perform GRE encapsulation. |
|
tunnel path-mtu-discovery |
Enable dynamic MTU discovery by the tunnel. |
|
tunnel source |
Set the source address of the tunnel. |
|
tunnel ttl |
Assign a TTL value to packets traveling through the tunnel. |
show interfaces |
|
Show interface configuration and statistics for a particular tunnel or all GRE tunnels. |
